You Are Cute. 3D Jelly Gel #02, 15 ml. Gel per design volumetrici, bianco

3D Jelly Gel for 3D nail designs — decorative gel with no sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dispense and apply directly to the nail.

Features:

• No sticky layer.
• Suitable for linear, dot and relief designs;
• Suitable for shaping designs using molds. 
• Allows you to create various 3D elements.
• Easily controlled directly from the tube.
• Curing wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Working recommendations:

For even curing, we recommend forming elements up to 2 mm thick. To create more volume, we recommend layering the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail and cure in the lamp.

For the neatest result, we recommend shaping and curing the element separately without removing it from the mold. After curing, remove the finished element, fix it on the nail with Rubber Base and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a linear, dot or 3D element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, be sure to let the material cool down.
4. If necessary, cover the design with top coat, especially if rubbing, color or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Let the material cool down, then carefully remove the mold.
3. Be sure to cover the design with top coat for stronger fixation and better durability. Cure for 120 seconds.

Metodo 2
1. Riempire lo stampo con il materiale e polimerizzare l'elemento senza rimuoverlo dallo stampo per 120 secondi.
2. Lasciare raffreddare il materiale, estrarre l'elemento finito e fissarlo sull'unghia con Rubber Base. Polimerizzare per 120 secondi.
3. Coprire il design con un top coat per una maggiore tenuta e una migliore resistenza all'usura. Polimerizzare per 120 secondi.

Composizione: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(La foto del prodotto sul sito potrebbe differire dal prodotto reale)

Volume: 15 ml
Produttore: You Are Cute