You Are Cute. 3D Jelly Gel #03, 15 ml. 3D design gel, black

Gel for Volumetric 3D Designs Jelly Gel — decorative gel with no sticky layer for creating raised elements and executing 3D designs on nails. Thanks to the tube format, the material is easy to dispense and apply directly onto the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for forming designs using molds. 
• Allows creating various volumetric elements.
• Easy to control directly from the tube.
• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Working Recommendations:

For even polymerization, we recommend forming elements up to 2 mm thick. For creating larger volume, we recommend layering the material, polymerizing each layer separately. 

When working with molds, the element can be polymerized directly on the nail: fill the mold with material, press it against the nail, and cure in the lamp.

For the most precise result, we recommend forming and polymerizing the element separately, without removing it from the mold. After polymerization, take out the finished element, fix it onto the nail using Rubber Base, and additionally seal with top coat.

Application Method

1. Perform standard nail preparation and apply the necessary base depending on the design technique: base coat, gel, gel polish, or top coat.
2. Carefully squeeze the desired amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or another tool, form a linear, dot, or raised element up to 2 mm thick.
3. Polymerize in a UV/LED lamp for 120 seconds. After polymerization, allow the material to cool down.
4. If needed, seal the design with top coat, especially if glitter, color, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with Molds
Method 1
1. Fill the mold with material.
2. Press the mold against the nail and polymerize in a UV/LED lamp for 120 seconds. Let the material cool down, then carefully remove the mold.
3. Always seal the design with top coat for better adhesion and wear resistance. Cure for 120 seconds.

Metodo 2
1. Fill the mold with the material and cure the element without removing it from the mold for 120 seconds.
2. Let the material cool down, remove the finished element and fix it on the nail using Rubber Base. Cure for 120 seconds.
3. Always seal the design with a top coat for a more secure adhesion and better durability. Cure for 120 seconds.

Ingredients: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Product images on the site may differ from the actual product)

Volume: 15 ml
Brand: You Are Cute