You Are Cute. 3D Jelly Gel #03, 15 ml. Gel for 3D designs, black

Gel for 3D voluminous designs 3D Jelly Gel — decorative gel with no sticky layer for creating raised elements and 3D nail designs. Thanks to the tube format, the material is easy to dose and apply directly onto the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for molding designs with molds. 
• Allows creating various voluminous elements.
• Easy to control directly from the tube.
• Curing wavelength — 365–405 nm.
• Required UV/LED lamp power — 36–48 W.

Application tips:

For even curing, we recommend forming elements up to 2 mm thick. To create more volume, layer the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the neatest result, we recommend forming and curing the element separately without removing it from the mold. After curing, remove the finished element, secure it on the nail with Rubber Base, and seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, Gel Polish, or top coat.
2. Carefully squeeze the desired amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, shape a linear, dot, or raised element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, allow the material to cool.
4. If necessary, seal the design with top coat, especially if you applied rubbing powder, color, or other decorative elements to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Always seal the design with top coat for better adhesion and durability. Cure for 120 seconds.

Método 2
1. Llene el molde con material y polimerice el elemento sin retirarlo del molde durante 120 segundos.
2. Deje que el material se enfríe, retire el elemento terminado y fíjelo en la uña con Rubber Base. Polimerice durante 120 segundos.
3. Asegúrese de cubrir el diseño con top coat para una fijación más segura y mejor durabilidad. Polimerice durante 120 segundos.

Composición: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(La foto del producto en el sitio web puede diferir del producto real)

Volumen: 15 ml
Fabricante: You Are Cute