You Are Cute. 3D Jelly Gel #03, 15 ml. Gel for Three-Dimensional Designs, Black

Gel for 3D Jelly Gel Volumetric Designs — decorative gel with no sticky layer for creating relief elements and performing 3D nail designs. Thanks to the tube format, the material is easy to dispense and apply directly onto the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and relief designs;
• Suitable for shaping designs using molds. 
• Allows you to create various volumetric elements.
• Conveniently controlled directly from the tube.
• Wavelength for curing — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Working recommendations:

For even curing, we recommend forming elements up to 2 mm thick. To create more volume, we recommend layering the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail, and cure it in the lamp.

For the neatest possible result, we recommend forming and curing the element separately without removing it from the mold. After curing, remove the finished element, secure it onto the nail using Rubber Base, and additionally seal it with a top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or another tool, form a linear, dot, or volumetric element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, allow the material to cool down.
4. If necessary, cover the design with a top coat, especially if rubbing powder, color, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool down, then carefully remove the mold.
3. Be sure to cover the design with a top coat for a more secure hold and better durability. Cure for 120 seconds.

Method 2
1. Fill the mold with the material and polymerize the element without removing it from the mold for 120 seconds.
2. Allow the material to cool, remove the finished element and affix it to the nail using Rubber Base. Polymerize for 120 seconds.
3. Be sure to overlay the design with a top coat for more reliable fixation and better durability. Polymerize for 120 seconds.

Ingredients: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Product photos on the website may differ from the actual product)

Volume: 15 ml
Manufacturer: You Are Cute