You Are Cute. 3D Jelly Gel #02, 15 ml. Gel for volume designs, white

Gel for Volumetric 3D Designs – Jelly Gel — decorative gel with no sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dispense and apply directly to the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and relief designs;
• Suitable for shaping designs using molds. 
• Allows creating various volumetric elements.
• Conveniently controlled directly from the tube.
• Curing wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Working recommendations:

For even curing, we recommend forming elements up to 2 mm thick. To create more volume, we recommend layering the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the neatest result, we recommend forming and curing the element separately, without removing it from the mold. After curing, remove the finished element, secure it on the nail with Rubber Base, and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a linear, dot, or volumetric element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, allow the material to cool down.
4. If necessary, cover the design with top coat, especially if glitter, color, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Always cover the design with top coat for better adhesion and durability. Cure for 120 seconds.

Método 2
1. Preencha o molde com o material e polimerize o elemento, sem removê-lo do molde, por 120 segundos.
2. Deixe o material esfriar, retire o elemento pronto e fixe-o na unha com Rubber Base. Polimerize por 120 segundos.
3. Sempre cubra o design com um top coat para uma fixação mais segura e melhor resistência ao desgaste. Polimerize por 120 segundos.

Composição: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(A foto do produto no site pode diferir do produto real)

Volume: 15 ml
Fabricante: You Are Cute