HEYLOVE. Frame builder Gel with Pump, O2 (Oxygen), 30 ml, universal extension gel with pump, sky blue ("oxygen")

FRAME gel - universal extension gel in 13 shades

Packaged in a jar with a pump for dosing the gel.

O2 (oxygen formula) - sky blue.

Video (material overview and package instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick layer holds the arch and does not deform;
• creates a strong coating resistant to chips;

Usage Instructions:

1. Sand the plate with a 180 grit file or a 100 grit buffer.
2. Wipe off dust with a degreaser, especially under the cuticle and in the side sinuses.
3. Apply dehydrator and wait 30 seconds for it to evaporate moisture.
4. Using rubbing motions, apply a primer layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or lay it into an upper form or lower form (depending on technique)
7. Polymerize each nail for 30 seconds, then at the end place both hands again for 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform surface filing if necessary.
9. Apply top No Sticky or Dark Story and cure for 1-2 min.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the UV lamp away from the master. If you hold the lamp with the light facing the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!