You Are Cute. Bottle Gel #09, 5 ml, liquid gel with shimmer

LIQUID GEL BOTTEL GEL — is an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists on 60–80% of acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Complete polymerization is achieved in 120 seconds.
• Suitable only for strengthening and extending nails.
• Has good shock absorption.
• When strengthening with this gel, it is necessary to file the natural nail.
• Requires an underlay of Rubber Base.
• It can be additionally heated to make the gel more liquid.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape or leave 2 mm of length, which we will remove after leveling.
3. With a 220-grit nail file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100-grit buffer.
4. We perform manicure.
5. If we work with removers, after working with them we wash our hands with soap.
6. We degrease the nail using Nail Prep. We do it in two passes. We use 4 wipes for this (1 wipe for 5 fingers). First pass: we wipe the nail surface. Second pass: we take an orange stick, place a wipe on it, and wipe everything in the cuticle area and nail folds.
7. We use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The underlay of Rubber Base is best applied with a flat gel brush. Movements should be rubbing. We paint all nail folds and cure in a lamp for 60 seconds.
9. We wipe off the sticky layer.
10. We level. If leveling with gel, we make a 0.5–1 mm indent from the cuticle. Cure in a lamp for 60 seconds.
11. We file the shape after leveling. This is necessary so that a thickness is formed at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so we must file 1 mm of the natural nail from the inside. In this case, there will be no delamination of the material. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, we wipe off the sticky layer and apply gel polish.
14. We apply top. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine