HEYLOVE. Frame builder Gel with Pump, LIFE IN PINK, 30 ml, universal builder gel with pump, cool pink

FRAME gel - universal builder gel in 13 shades

Packed in a jar with a pump for dispensing gel.

LIFE IN PINK - cool pink.

Video (material review and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Characteristics:

• for sculpting, correction, strengthening, and extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, but in a thick layer it holds the arch and does not deform;
• creates a strong coating resistant to chips;

How to use:

1. Sand the nail plate with a 180 grit file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side sinuses.
3. Apply dehydrator and wait 30 seconds for it to evaporate the moisture.
4. Using rubbing motions, apply a primer layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique)
7. Cure each nail for 30 seconds, then at the end place both hands again for 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform a surface filing if necessary.
9. Apply No Sticky or Dark Story top coat and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the UV lamp away from the master. If you keep the lamp on with light facing the master, unwanted polymerization of the material may occur on brushes and on the necks of open bottles.

Note: all documents are in the attached files!