HEYLOVE. Frame builder Gel, ANGEL WING, 30 ml, universal builder gel, milky pink

FRAME gel - universal builder gel in 13 shades

Packaged in a jar with a pump for dispensing gel.

ANGEL WING - milky pink.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for modeling, correction, strengthening, building without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick layer it holds the arch and does not deform;
• creates a durable coating, resistant to chipping;

How to use:

1. Buff the nail plate with a 180 grit nail file, or a 100 grit buffer.
2. Wipe with a degreaser from dust, especially under the cuticle and in the side pockets.
3. Apply dehydrator and wait 30 seconds for it to evaporate moisture.
4. With rubbing motions, apply a priming layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place it into an upper form or on a lower form (depending on technique)
7. Cure each nail for 30 seconds, then at the end cure both hands for an additional 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform surface filing as needed.
9. Apply No Sticky or Dark Story top and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to start polymerization of the material. When painting nail tips, we recommend keeping the working side of the UV lamp that is on, away from the master. If you hold the lamp with the light towards the master, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.

Note: all documents are in the attached files!