SALE / LUNAmoon. Opal Base #6, 13 ml

WARNING! Shelf life - until 10/17/2026

Opal Base  — this is a camouflage base for coating and leveling nails.

Features:

• Low-acid 5-6 pH.
• Elastic and flexible.
• Provides a high level of coverage of the natural nail due to high pigmentation.
• May give minimal shrinkage during wear because it is elastic.
• Medium consistency.
• Provides wear without lifting for 3-4 weeks.
• Has a neutral smell.
• Hypoallergenic.
• Removes well both by filing and with remover.
• Does not run and self-levels very quickly.
• Requires an underlayer of Rubber base LUNAmoon.
• Not suitable for leveling long nails without prior reinforcement.
• Curing time in the lamp: 120 seconds.
• Lamp power for curing - 36-48 W (must be only an original lamp).
• The main rule when leveling: the thickness at the free edge should be 0.5 mm.
• Thixotropic - becomes thinner if you move the brush while working.

Application method:

1. Removal.
2. We do not file the nail shape. Or we leave 2 mm of length, which we will remove after leveling.
3. With a 220 grit file, without strong pressure, file the nail top, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Manicure.
5. If you are working with removers, you need to wash your hands with soap and water after using them.
6. Degrease the nail with Nail Prep. We perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). The first pass: wipe the nail surface. The second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and sinuses.
7. Use primer as desired, but if the base coat has enough acidity, primer is not needed.
8. Base coat of Rubber base Lunamoon. It is best applied with a flat gel brush. Movements should be rubbing. It is important to paint all nail sinuses. Cure for 60 seconds.
9. Wipe off the sticky layer.
10. Leveling with Opal Base LUNAmoon. Cure in the lamp for 90 seconds.
11. File the shape after leveling. This is needed to create a thickness on the nail edge that will hold the free edge.
12. After filing, wipe off the sticky layer.
13. Apply top coat and cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

(Product photo on the website may differ from the actual product)