LUNAmoon. RUBBER BASE, Marker, clear, 5 ml, transparent rubber base in marker format

BASE MARKER: Rubber Base in a new marker format with a thinner formula. A modern format for flawless technique!

Rubber Base is a transparent, universal base with a liquid consistency designed as a base layer for hard materials and colored bases.

Marker features:

• Precision application: controlled amount of product for even application.
• Economy: rational use of product without excessive waste.
• Speed of work: natural movements similar to holding a pen for fast application.

Base features:

• Consistency is liquid (has a thinner formula than standard LUNAmoon Rubber Base).
• Has an acidity of 3–4 pH.
• May cause a feeling of heat and burning on damaged and very thin nails (on healthy nails — no).
• Designed as a base layer for hard materials and colored bases.
• Lamp power for curing the base — 36–48 W. The lamp must be original.
• 100% adhesion when following the correct application technique.
• Removes easily both by filing and using liquid.
• Hypoallergenic and has a neutral odor.

Application method:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do the manicure.
5. If working with removers, after working with them wash hands with soap.
6. Degrease the nail using Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it and wipe everything in the cuticle area and the sinuses.
7. Apply Ultrabond LUNAmoon (optional). Before application, it is important to wipe the brush with a lint-free wipe to remove excess material. Using a semi-dry brush, apply Ultrabond LUNAmoon to 5 fingers. Wait 1 minute for it to absorb into the nail plate.
8. Base layer using MARKER BASE Rubber Base. Apply to the nail plate and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Cover and level with any material for convenience: colored base or builder gel. Cure in the lamp for 120 seconds.
11. File the shape after leveling. This is needed so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and cover with a thin layer of gel polish or camouflage base.
14. Cover with top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

Important: do not leave the marker open. Close the cap tightly after use. Avoid exposure of the product to UV/LED rays. Store in a dark place, away from direct sunlight.

Shelf life of the product: 24 months. Store opened for no more than 12 months.
(Product photos on the website may differ from the actual product)