ADORE. One Drop Gel, 30 g, #09, Milk tea. Builder gel, milky beige

Builder gel for nail extension in a jar with a vacuum pump one Drop Gel No. 09 - milky beige

one Drop Gel - medium-thick camouflage gel for extension, strengthening, and correction of nail architecture for medium and above-medium length.

Used for:
- extension on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ comfortable medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dispensing system: one press = one drop. The volume of the drop is adjusted by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform manicure, give desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER over the entire nail, let it air-dry until a whitish hue appears on the nail plate surface
3. Bonding: when using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply a uniform priming layer of PRO BASE-BOND base coat, carefully working the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 min, in an LED lamp 60 sec.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire nail plate surface, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, following the basic principles of solid material modeling. Polymerize in a UV lamp for 2-4 min, in an LED lamp - 90 sec.
Remove the residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 grit nail file, perform step-by-step shape filing.

PRO tips:
- to facilitate material placement, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.

Extension: prepare/set the forms one by one on each finger. Lay a thin substrate of desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, you can pinch the gel at the 7-12 second mark, depending on the lamp type and power. Then cure the nail in the lamp until full polymerization: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 nail file, perform step-by-step shape filing.

PRO tip: apply gel with at least a 1mm gap from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g