Cart is empty
Gel Polish No. 512 – dusty lilac
High-quality gel polish of medium density has a dense saturated pigment. Provides a neat, even coating of the nail plate in one or two layers, does not run into the sinuses, has no strong odor.
Thanks to a fairly thick consistency, it can be used not only as an independent color but also for design. Has an optimal polymerization speed in UV/LED lamps.
Advantages of ADORE gel polish professional:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, give the desired shape to the free edge of the nail. If using a remover, remove its residue with a damp wipe
1 Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving a 1 mm gap from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base layer:apply a base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a dried backing layer
1 Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving a 1 mm gap from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base layer:apply a base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a dried backing layer
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Polymerize each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Top coat:seal the coating with a top coat. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds. Allow the coating to cool completely
To level the architecture with the top coat, we recommend using top coats of medium-thick and thick consistency
! PRO tip: light and bright gel polishes: to preserve the intensity of shades, apply a top coat with UV filters; for dark and red colors, to prevent shade distortion, use a top coat without UV filters
! Strict adherence to the gel polish application technology is the key to long-lasting manicure without chips, cracks, or peeling.