Koszyk jest pusty
Gel-Polish No.512 – dusty lilac
High-quality gel polish of medium density with rich, intense pigment. Provides a neat, even coverage of the nail plate in one or two coats, does not seep into the sidewalls, and has no strong odor.
Thanks to its rather thick consistency, this gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV/LED lamps.
Advantages of ADORE Gel Polish professional:
- safe 9-free formula
- up-to-date palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge as desired. If using a remover, remove its residue with a damp wipe.
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the nail plate surface.
3. Bonding:with a semi-dry brush, apply the acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and sidewalls. Allow to air-dry for 15 seconds.
4. Base layer:apply the base coat in an even layer. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60–90 seconds. For arch architecture leveling with a base, we recommend using only low-acid bases over a cured foundation layer.
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the nail plate surface.
3. Bonding:with a semi-dry brush, apply the acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and sidewalls. Allow to air-dry for 15 seconds.
4. Base layer:apply the base coat in an even layer. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60–90 seconds. For arch architecture leveling with a base, we recommend using only low-acid bases over a cured foundation layer.
5. Color:apply GEL POLISH in 1–2 thin coats, avoiding heavy pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds.
6. Finish layer:seal the coating with a top coat. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60 seconds or more. Allow the coating to cool completely.
For arch architecture leveling with a top coat, we recommend using top coats of medium-thick to thick consistency.
! PRO Tip: jasne i żywe lakiery hybrydowe – aby zachować nasycenie odcieni, pokrywaj topem z filtrami UV, natomiast ciemne i czerwone kolory, aby zapobiec zniekształceniu odcienia, pokrywaj topem bez filtrów UV
! Ścisłe przestrzeganie technologii nakładania lakieru hybrydowego jest gwarancją długotrwałego noszenia manicure bez odprysków, pęknięć i odwarstwień.