Il carrello è vuoto
Gel Polish No.512 – dusty lilac
High-quality gel polish with medium density has dense, rich pigment. Provides a neat, even coverage of the nail plate in one or two layers, does not flow into the sinuses, has no strong odor.
Thanks to a fairly thick consistency, the gel polish can be used not only as a standalone color, but also for nail art. It has an optimal polymerization speed in UV/LED lamps.
Advantages of ADORE Gel Polish professional:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail. If using a remover, remove its residues with a damp wipe.
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and lateral ridges. Allow to air-dry for 15 seconds
4. Base coat:apply base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To correct the architecture with base, we recommend using only low-acid bases on a dried foundation layer
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and lateral ridges. Allow to air-dry for 15 seconds
4. Base coat:apply base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To correct the architecture with base, we recommend using only low-acid bases on a dried foundation layer
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Polymerize each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Top coat:seal the coating with top coat. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds. Allow the coating to cool completely
To correct the architecture with top, we recommend using top coats with a medium-thick and thick consistency
! PRO tip: Per i gel polish chiari e brillanti, per mantenere la saturazione delle tonalità, applicare un top coat con filtri UV; per i colori scuri e rossi, per prevenire la distorsione della tonalità, applicare un top coat senza filtri UV
! La precisa osservanza della tecnologia di applicazione del gel polish è la garanzia di una lunga durata della manicure senza scheggiature, crepe e distacchi.