Cart is empty
Gel polish #372 – green jade
High-quality gel polish of medium density with a dense, rich pigment. It provides a neat, even coverage of the nail plate in one or two coats, does not run into the lateral grooves, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV / LED lamps.
Advantages of ADORE professional gel polish:
- safe 9-free formula
- up-to-date palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge as desired. If using remover, remove its residue with a damp wipe.
1. Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe), degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air-dry until a whitish tint appears on the nail plate surface.
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and lateral ridges. Allow it to air-dry for 15 seconds.
4. Base coat:apply a base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with base, we recommend using only low-acidity bases over a cured substrate.
1. Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe), degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air-dry until a whitish tint appears on the nail plate surface.
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and lateral ridges. Allow it to air-dry for 15 seconds.
4. Base coat:apply a base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with base, we recommend using only low-acidity bases over a cured substrate.
5. Color:apply GEL POLISH in 1-2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds.
6. Finish coat:seal the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds or more. Allow the coating to cool completely.
To level the architecture with top coat, we recommend using top coats of medium-dense and dense consistency.
! PRO tip:cover light and bright gel polishes with a top with UV filters to preserve color intensity, and dark and red colors with a top without UV filters to prevent color distortion.
! Strict adherence to the gel polish application technique is the key to long-lasting manicure wear without chips, cracks, or peeling.