Cart is empty
#373 BRICK
A shade of terracotta tiles — the color of urban facades after the heat. A warm orange-red tone. Dense, vivid, mineral — gives the effect of burnt clay on the coating.
NEW PACK
The design of the updated ADORE bottle was created by a New York agency as an ideal tool for a nail artist's creativity. Balanced proportions, a secure grip, and a stable fit in the hand ensure precise and confident work every day.
Color ID
Instant shade identification thanks to the large Color ID on the side of the bottle — 99% match to the gel polish shade.
Next-generation brush
Synthetic high-tech bristles have optimal springiness and a rounded tapered tip. They provide more precise application in the cuticle area and even distribution of the material. The optimal brush length allows you to use the gel polish to the last drop.
Ergonomic cap
Precise dimensions: 15 mm in diameter and 40 mm in length reduce hand strain and ensure work without overexertion.
Integration into space
The white matte bottle with minimalist design blends organically into the interiors of concept salons and modern studios.
WHY YOU WILL ADORE IT?
The medium-thick consistency provides full coverage in 1–2 coats and allows you to work at a fast pace using the assembly-line method. The gel polish does not run under the cuticle, self-levels perfectly, and is completely controlled by brush movements.
Use the gel polish as a main color or as a design material, similar to paints. Shades mix easily with each other, allowing you to create custom color solutions.
Every ADORE bottle is a space for customization: you can paint it, add a sticker, or turn it into an art object.
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge as desired. If using remover, remove its residue with a damp wipe.
- Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe), degrease the nail plate.
- Dehydration:apply NAIL FRESHER to the entire nail, allow it to air-dry until a whitish tint appears on the nail plate surface.
- Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and lateral ridges. Allow it to air-dry for 15 seconds.
- Base coat:apply a base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds.
To level the architecture with base, we recommend using only low-acidity bases over a cured substrate.
- Color:apply GEL POLISH in 1-2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds.
- Finish coat:seal the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds or more. Allow the coating to cool completely.
To level the architecture with top coat, we recommend using top coats of medium-dense and dense consistency.
! PRO tip:cover light and bright gel polishes with a top with UV filters to preserve color intensity, and dark and red colors with a top without UV filters to prevent color distortion.
! Strict adherence to the gel polish application technique is the key to long-lasting manicure wear without chips, cracks, or peeling.