ADORE. One Drop Gel, 30 g, #11, Baby powder. Builder gel, white milky

Builder gel for nail extensions in a jar with a vacuum pump one Drop Gel №11 - milky white

one Drop Gel - medium-thick camouflage gel for extensions, strengthening, and correction of nail architecture for medium and above-medium length.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you need to remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, shape the free edge of the nail as desired.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the nail plate surface
3. Bonding: if using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply an even priming layer of PRO BASE-BOND base coat, carefully covering the side walls and free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire nail plate surface, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, following the basic principles of modeling with hard materials. Cure in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the residual tackiness using PREP&FINISH and a lint-free wipe. Using a 150/180 grit nail file, perform step-by-step filing of the shape.

PRO tips:
- to facilitate material application, you can use upper forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare/place forms one by one on each finger. Apply a thin base of the desired length and shape directly onto the lower or upper form, then model the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the lamp type and power. Then place the nail in the lamp for full gel polymerization: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual tackiness using PREP&FINISH and a lint-free wipe. Using a 150/180 nail file, perform step-by-step filing of the shape.

PRO tip: apply gel with a minimum 1mm gap from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g