ADORE. One Drop Gel, 30 g, #12, Brandy rose. Builder gel, dusty rose

Builder gel in a jar with a vacuum pump one Drop Gel №12 - dusty rose

one Drop Gel - medium-density camouflage builder gel for nail extension, strengthening, and correction of nail architecture for medium to above-medium length.

Used for:
- extension on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-density consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you must remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the NP
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the NP surface
3. Bonding: if using adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply a thin even layer of base coat PRO BASE-BOND, carefully sealing the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire NP surface, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 minutes, in an LED lamp for 90 seconds.
Remove the sticky residue using PREP&FINISH and a lint-free wipe. Use a 150/180 grit nail file to perform a step-by-step filing of the shape.

PRO tips:
- to make material application easier, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare/install forms one by one on each finger. Place a thin underlay of the desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp for complete polymerization of the gel: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the sticky residue using PREP&FINISH and a lint-free wipe. Use a 150/180 grit nail file to perform a step-by-step filing of the shape.

PRO tip: apply gel leaving a gap of min 1mm from the cuticle to avoid material lifting in this area

Brand: ADORE 
Volume: 30 g