You Are Cute. Juicy Gel #10, 15 ml, gel for nail extension

Juicy Gel – a polymer light-curing material which, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• It has shock absorption and does not crack upon impact.
• It has a medium consistency.
• It has medium pigmentation, covering the free edge.
• Suitable for the "no-filing extension" technique.
• Suitable for extension "on top forms".
• Does not cause burning in the lamp.
• Becomes thicker in cold and thinner in warmth.
• Thixotropic – becomes thinner if you move the brush during work.
• It can be additionally heated to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlayer.
• Wavelength for polymerization 365-405 nm.
• UV/LED lamp power 36-48W.
• Permissible coating thickness 0,5 mm at the edge/ 1 mm at the apex.
• Full polymerization 120 seconds.

Application method: 
STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit file, dust without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, place a wipe on it and wipe everything in the cuticle area and sinuses.
7. Use primer optionally, but if the base for the underlayer has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlayer with a flat gel brush. The base should be applied in an even layer. Paint all the sinuses of the nail and cure in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base, as it helps chemically bond with subsequent layers of coating (gel, color, base). When removing the sticky layer, chemical adhesion weakens and there is a risk of peeling.
10. Level. If leveling with gel, make an indent from the cuticle of 0,5–1 mm. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the tackiness and cover with gel polish. 
14. Cover with top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.
     

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, dust without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, place a wipe on it and wipe everything in the cuticle area and sinuses.
7. Use primer.
8. It is best to apply the Rubber Base underlayer with a flat gel brush. The base should be applied in an even layer. Paint all the sinuses of the nail and cure in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base, as it helps chemically bond with subsequent layers of coating (gel, color, base). When removing the sticky layer, chemical adhesion weakens and there is a risk of peeling.
10. Install the form for extending the free edge of the nail.
11. Lay out the shape of the artificial nail with clear gel. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off the tackiness and excess dust.
14. Go over the areas where the file was used once more with Rubber Base. Cure for 30 seconds.
15. Level with gel, place in the lamp and clamp at 10–15 seconds. If the gel has strong tackiness or contains glitter, clamp at 20 seconds.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the tackiness and cover with gel polish.
18. Cover with top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.
     

Ingredients: Acrylates Copolymer, Hema, Silica Dimethyl Silylate, Dimethicone, Ethyl Trimethylbenzoyl Phenylphosphinate May Contain: CI 77891, CI 18965, CI 15510, CI 73360, CI 73385, CI 74160, CI 74260, CI 77266

TPO FREE