You Are Cute. Bottle Gel #07, 15 ml, liquid gel with shimmer

LIQUID GEL BOTTEL GEL — innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Acceptable coating thickness — 0.5 mm at the edge of the nail, 1 mm — at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization is achieved in 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, you need to file down the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. With a 220 grit nail file, lightly file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it, and wipe everything around the cuticle area and sidewalls.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing. Paint all the nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with gel, step back 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the edge of the nail, which will support the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material peeling. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Cover with top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine