Nail sliders SOVADECOR, 053
Description
Thanks to the two-layer UV printing with a white backing, SOVADECOR sliders have extremely clear and bright images.
The sliders are made of a thin polymer film, thanks to which they easily separate from the backing after soaking and follow the shape of the nail.
SOVADECOR sliders are very convenient to use, so even technicians with little experience will be able to create stunning designs without difficulty.
Step-by-step instructions:
1. Prepare your nails for applying the slider design: do a manicure and apply gel/gel polish. If the nails are soft, strengthen them.
2. Apply the base color.
3. On the dried color layers, apply a top coat for better adhesion of the slider to the nail. Cure the top coat in a UV lamp for 1 min, in an LED lamp for 30 sec.
4. Select a slider, trim and prepare it according to the nail size.
5. Place the slider with the paper backing down on a cotton pad soaked in warm water (! 40-50 °C) cotton pad, wait about 15-30 seconds and transfer the image by sliding the slider onto the nail to the cuticle base.
6. Smooth out the film, pushing out the remaining water and air with a soft tissue. Let it air dry or cure in the lamp. File the free edges well and wipe with a lint-free wipe soaked in a liquid for removing the sticky layer to remove dust.
7. Apply 1-2 coats of top coat, curing each coat in the lamp (pay special attention to the free edges, they need to be well sealed).