LUNAmoon. Premium Builder Gel "La Ballerina" #19, 15 ml, builder gel

Classic builder gel for extensions Premium – a polymer light-curing material that, due to its strength, allows you to significantly extend the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• Acid-free.
• Has cushioning, does not crack upon impact.
• Medium consistency.
• Medium pigmentation, covers the free edge.
• Suitable for the "no-filing extension" technique.
• Suitable for extension "on top forms".
• Does not cause burning in the lamp.
• Becomes thicker in cold, thinner in warmth.
• Thixotropic – becomes thinner when moving the brush during work.
• Can be additionally heated to make the gel thinner.
• Hard at a thickness of 1 mm. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlay.
• Wavelength for polymerization 365-405 nm.
• UV/LED lamp power 36-48W.
• Allowable coating thickness: 0.5 mm at the edge / 1 mm at the apex.
• Full polymerization 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit nail file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail using Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sinuses.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base LUNAmoon underlay with a flat gel brush. Movements should be rubbing. Paint all the sinuses of the nail and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level with builder gel, leaving a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material detachment. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

CLASSIC EXTENSION

1. Removal.
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit nail file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail using Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sinuses.
7. Use LUNAmoon primer.
8. It is best to apply the Rubber Base LUNAmoon underlay with a flat gel brush. Movements should be rubbing. Paint all the sinuses of the nail and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Install the form for extending the free edge of the nail.
11. Apply the shape of the artificial nail with clear builder gel. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off the sticky layer and excess dust.
14. Go over the areas where the file was used once more with Rubber Base LUNAmoon. Cure for 30 seconds.
15. Level with builder gel, place in the lamp and pinch at the 10-15th second. If the gel has strong stickiness or contains glitter, pinch at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the sticky layer before applying gel polish.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

Shelf life: 24 months. Store open for no more than 18 months.

TPO FREE