LUNAmoon. Opal Base #4, 13 ml

Opal Base  is a camouflaging base for covering and leveling nails.

Features:

• Weakly acidic pH 5-6.
• Elastic and flexible.
• Provides a high level of coverage of the natural nail due to high pigmentation.
• May show minimal shrinkage during wear because it is elastic.
• Medium consistency.
• Ensures wear without lifting for 3-4 weeks.
• Neutral odor.
• Hypoallergenic.
• Removes well both by filing and with liquid.
• Does not run and self-levels very quickly.
• Requires a base coat of Rubber base LUNAmoon.
• Not suitable for leveling long nails without prior reinforcement.
• Curing time in lamp: 120 seconds.
• Lamp power for curing: 36-48 W (must be an original lamp only).
• Main rule during leveling: the thickness at the nail edge should be 0.5 mm.
• Thixotropic — becomes thinner if you move the brush during work.

Application method:

1. Removal.
2. Do not file the nail shape. Or leave a 2 mm length that we will remove after leveling.
3. With a 220 grit file, file without heavy pressure on the nail top, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Manicure.
5. If you work with removers, after using them you need to wash your hands with soap and water.
6. Degrease the nail using Nail Prep. Perform two approaches. For this, use 4 wipes (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and the sinuses.
7. Primer is used optionally, but if the base coat has sufficient acidity, then primer is not needed.
8. Foundation layer with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing motions. It is important to paint all the nail sinuses. Cure for 60 seconds.
9. Wipe off the stickiness.
10. Leveling with Opal Base LUNAmoon. Cure in the lamp for 90 seconds.
11. Filing the shape after leveling. This is needed to create thickness at the edge of the nail that will hold the free edge.
12. After filing, wipe off the stickiness.
13. Apply top coat and cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

(Product photos on the website may differ from the actual product.)