LUNAmoon. Opal Base #2, 13 ml

Opal Base  is a camouflage base for coating and leveling nails.

Features:

• Slightly acidic 5-6 pH.
• Elastic and flexible.
• Provides a high level of coverage of the natural nail due to high pigmentation.
• May give minimal shrinkage during wear because it is elastic.
• Medium consistency.
• Provides wear without lifting for 3-4 weeks.
• Has a neutral odor.
• Hypoallergenic.
• Removes well both by filing and with liquid.
• Does not run and self-levels very quickly.
• Requires a base of Rubber base LUNAmoon.
• Not suitable for leveling long nails without prior reinforcement.
• Curing time in the lamp is 120 seconds.
• Lamp power for drying is 36-48 W (it must be only the original lamp).
• The main rule during leveling: the thickness at the edge of the nail should be 0.5 mm.
• Thixotropic — becomes thinner if you move the brush during work.

Application method:

1. Removal.
2. We do not file the nail shape. Or we leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit file, we file without strong pressure, the nail from above, lifting the scales of the nail plate, or we use a 100 grit buffer.
4. Manicure.
5. If you work with removers, after using them you need to wash your hands with soap and water.
6. Degrease the nail using Nail Prep. Perform two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and the sinuses.
7. Use primer optionally, but if the base coat has sufficient acidity, then primer is not needed.
8. Underlay with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing movements. It is important to paint all nail sinuses. Cure for 60 seconds.
9. Remove the stickiness.
10. Leveling using Opal Base LUNAmoon. Cure in the lamp for 90 seconds.
11. File the shape after leveling. This is needed so that a thickness forms at the edge of the nail that will hold the free edge.
12. After filing, remove the stickiness.
13. Apply top coat and cure for 120 seconds. Do not wipe after curing, as the shine may be lost.

(The product photo on the website may differ from the actual product)