LUNAmoon. Glass Gel #05, 15 ml. Stained glass builder gel for nail extensions

Stained glass builder gel for nail extensions Glass gel №5 — a polymer light-curing material for strengthening and extending nails. Thanks to the stained glass effect, the material allows you to create a transparent colored coating with depth and a glass effect.

The color intensity can be changed depending on the layer thickness: in a thin layer it creates the effect of a transparent colored veil; at a thickness of up to 2 mm it has a more pronounced color but retains a transparent glass effect.

Features:

• Is acid-free.
• Has a medium consistency, closer to runny.
• Not viscous, easy to pick up and apply with a brush.
• Self-levels well.
• Distributes evenly over the nail plate surface.
• Does not run during work.
• Light consistency reduces the risk of air bubbles forming during application.
• Suitable for strengthening the nail plate.
• Suitable for the 'extension without filing' technique.
• Suitable for extension on top forms.
• Has shock absorption, does not crack on impact.
• Becomes thicker in cold, thinner in warmth.
• Can be additionally warmed to make the consistency more liquid.
• Does not cause strong burning in the lamp.

Important:

• Requires a Rubber Base underlayer.
• The thickness of the free edge must be at least 1 mm.
• Preliminary fixation with a flashlight — 10–15 seconds depending on power.
• Recommended wavelength for polymerization — 365–405 nm.
• Recommended UV/LED lamp power — 36–48 W.
• Maximum material thickness per polymerization stage — up to 2 mm.
• Full polymerization — 120 seconds.
• If the material thickness is more than 3 mm, we recommend working in two stages with intermediate polymerization.

Application Method

STRENGTHENING

1. Remove previous coating.
2. Do not file the nail shape or leave up to 2 mm of length to be removed after leveling.
3. Using a 220 grit nail file, buff the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail using Nail Prep LUNAmoon in two approaches. Use 4 wipes: 1 wipe per 5 fingers. First approach: wipe the nail surface. Second approach: place the wipe on an orange stick and thoroughly wipe the cuticle area and sinuses.
7. Use primer optionally. If the base for the underlayer has sufficient acidity, primer is not needed.
8. The underlayer of Rubber Base LUNAmoon is best applied with a flat gel brush using rubbing motions. Paint all the nail sinuses and cure in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Perform leveling with Glass Gel, leaving a 0.5–1 mm gap from the cuticle. Cure in the lamp for 120 seconds.
11. After leveling, file the shape. This is necessary so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will help avoid material detachment. If the material is hard and the nail is very soft, the nail itself may start to separate from the hard material from the free edge.
13. After filing, remove the sticky layer and clean dust.
14. If necessary, apply gel polish.
15. Cover with a no-wipe top coat. Cure for 120 seconds. Do not wipe after curing to avoid losing shine.

CLASSIC EXTENSION

1. Remove previous coating.
2. Shorten the nail length to 1 mm and give a round shape.
3. Using a 220 grit nail file, buff the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail using Nail Prep LUNAmoon in two approaches. Use 4 wipes: 1 wipe per 5 fingers. First approach: wipe the nail surface. Second approach: place the wipe on an orange stick and thoroughly wipe the cuticle area and sinuses.
7. Use LUNAmoon primer.
8. The underlayer of Rubber Base LUNAmoon is best applied with a flat gel brush using rubbing motions. Paint all the nail sinuses and cure in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Place a form for the free edge extension.
11. Apply the artificial nail shape with Glass Gel. Pre-cure in the lamp for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Remove the sticky layer and clean dust.
14. Reapply Rubber Base LUNAmoon to areas where you used the file. Cure for 60 seconds.
15. Perform leveling with Glass Gel, place in the lamp and clamp at the 10–15th second. If the material has stronger stickiness, clamp at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Remove the sticky layer before applying gel polish.
18. If necessary, apply gel polish.
19. Cover with a no-wipe top coat. Cure for 120 seconds. Do not wipe after curing to avoid losing shine.

Ingredients INCI: Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate. May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510.

Product shelf life: 24 months. Keep no more than 18 months after opening.

TPO FREE