HEYLOVE. Tint base, GOJI, 15 ml, tinted base
Thanks to dense pigmentation and elasticity, the GOJI tinted base creates a perfectly even coverage after just one coat.
Shade: dusty dark pink
Collection: FOREST
Consistency: medium
Hardness/Elasticity: elastic
Acidity: neutral, pH=6.7
Scent: neutral
Pigmentation: dense, covers the free edge
Application method:
-
Thoroughly degrease the nail plate with phBond dehydrator.
- Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely.
-
Apply a layer of clear Rubber base as a base coat and cure for 30 seconds.
-
Apply one or two layers of Tint base. Cure in UV/LED lamp for 60 seconds.
-
As the final layer, apply a top coat (top).
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Composition (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Warning! To avoid unwanted polymerization of the material during work, testing, or content shooting, the open bottle or brush must be kept as far as possible from daylight (especially direct sunlight). Also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to start polymerizing the material. When painting nail tips, we recommend keeping the working side of the operating UV lamp away from the technician. If the lamp is turned on facing the technician, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on the density (viscosity).
It's just a law of physics, nothing else.
For example, in water, bubbles hold very briefly and come out on their own.
If we take thicker liquids (honey, thick builder gel, etc.) – in these products, bubbles readily settle in and do not leave them as quickly as water.
So with the base. If you work carelessly with the brush, sharply dipping it into the bottle, it involuntarily acts as a blender that mixes the material with air, forming bubbles. This is especially true for materials in bottles with a brush.
Therefore, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We deliberately chose a medium-density consistency, because it has advantages:
- the material does not run, does not flood;
- contours are clear without extra effort;
- the technician calmly builds the nail architecture and has time to check it by the reflection;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
At our production, we have equipment that prevents the formation of bubbles in the material at all stages – from mixing the pigment to filling into bottles.
We also warn our partners that we are against the in-store consultant opening the bottle for the customer and showing the material. Because a consultant who is not a nail technician does not understand that the brush can create bubbles without even realizing it.
Not to mention that the bottle necks look unsightly when they are soiled with material up to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the law of physics, in a warm environment, molecules move faster, and this speeds up the process.
The air will come to the surface, as it is lighter than liquid.
- Ukraine
- Opaque
- Розовые