Cart is empty
ADORE. Ultrabond, 8 ml, Acid-free primer
Please sign in so that we can notify you about a reply
Acid-free primer ULTRABOND – a product that creates/improves adhesion between the natural nail surface and polymer material.
Used as the third step of nail plate preparation in the gel polish system and in nail modeling and strengthening systems. Applied after the dehydrator before applying the base coat.
Recommended for use with base materials that have medium and low acidity. For high-acid base coats, the use of primers should be avoided to prevent excessive adhesion (MULTI BASE, RUBBER BASE), or applied only to areas most prone to lifting (free edge).
The product has a delicate effect on natural nails, with a neutral pH: 6.
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge as desired. When using a remover, remove its residues with a damp wipe.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply a thin layer of NAIL FRESHER over the entire nail surface; for moist hands – on the nail and side walls. Let air-dry until a whitish shade appears on the nail plate surface. If necessary, repeat several times.
3. Bonding: with a semi-dry brush, apply ULTRABOND to the entire nail, leaving a 1mm gap from the cuticle and side walls. Try to apply the product in 1-2 strokes to prevent excessive adhesion, holding the brush at a 15-degree angle to the plate. Let air-dry for 15 seconds.
Use in designs:
• for sealing the tips of designs with rubbing powders before applying the top coat
• for smoothing out unevenness of slider design before fixing the design with base
Brand: ADORE
Volume: 8 мл
No posts found