HEYLOVE. Smart gel, MILKY, 30 ml, liquid builder gel, builder gel, milky white

SMART GEL – liquid builder gel, ideal for salon modeling and correction of medium length.

Characteristics:

• Comfortable consistency that spreads evenly and is easy to control.
• After polymerization in a thin layer elastic, in a 1 mm layer hard with cushioning.
• Provides strength and durability of the coating while remaining easy to work with even for beginners.
• Does not heat up in the lamp and does not cause discomfort.

Advantages:

• Extension with minimal filing.
• Strengthening natural nails.
• Leveling and shape correction.
• Easy self-leveling and control during work.
• Strong and durable coating.
  

Application method:

1. Buff the nail plate with a 180 grit file or 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side sinuses.
3. Apply dehydrator phBond and wait 30 seconds for it to evaporate moisture.
4. With rubbing movements, apply a primer layer of rubber base and add a small amount of base to create a smooth surface.
5. Dry for 30 seconds.
6. Remove the dispersion (sticky) layer from the base after polymerization, especially under the cuticle.
7. Apply Smart gel in an architectural layer. Polymerize for 30 seconds, then put both hands again for 1 minute.
8. Remove the sticky layer from the Smart gel.
9. Perform surface filing if desired and be sure to file the end to create gel thickness.
10. As the last layer, apply top coat. Dry for 1-2 minutes.
11. Using a carbide "corn" shaped drill, saw off the natural nail from the free edge area from underneath.
12. Carefully buff the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand care products. Done!

Collection: BASIC

Video: https://www.instagram.com/reel/DEuMyzKIU2i/?igsh=MWpscGR1aDN6N3Z3bQ==

Volume: 30 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone. May Contain: Cl 45380, CI 15850, Cl 77491, CI 15985, CI 77492, CI 77007, Cl 77510, Cl 77742, Cl 77289, Cl 77499, Cl 77891, CI 77000.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp turned away from the master. If you hold the turned-on lamp with the light towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!