Cart is empty
Gel polish No. 484 – turquoise-blue
High-quality gel polish of medium density has a dense rich pigment. Provides neat, even coverage of the nail plate in one or two layers, does not flood into the sinuses, has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for design. It has optimal curing speed in UV / LED lamps.
Advantages of ADORE professional gel polish:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail as needed. If using a remover, wipe off its residue with a damp cloth.
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the nail plate surface
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and side walls. Allow to air-dry for 15 seconds
4. Base layer:apply a base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For nail plate leveling with base, we recommend using only low-acid bases on a cured underlayer.
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow to air-dry until a whitish tint appears on the nail plate surface
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and side walls. Allow to air-dry for 15 seconds
4. Base layer:apply a base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For nail plate leveling with base, we recommend using only low-acid bases on a cured underlayer.
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Cure each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Finish coat:seal the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for at least 60 seconds. Allow the coating to cool completely
For leveling the architecture with top coat, we recommend using top coats of medium-thick and thick consistency.
! PRO tip: light and bright gel polishes should be covered with a top coat with UV filters to preserve color intensity, while dark and red colors should be covered with a top coat without UV filters to prevent color distortion.
! Strict adherence to the gel polish application technology is the key to long-lasting manicure without chips, cracks, or peeling.