Cart is empty
Gel polish #204 – soft pink
High-quality medium-density gel polish has a dense, rich pigment. It provides neat, even coverage of the nail plate in one or two layers, does not flood the sinuses, and has no strong odor.Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for design. It has an optimal curing speed in UV / LED lamps.
Advantages of ADORE professional:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure and give the desired shape to the free edge of the nail. If using a remover, remove its residues with a damp wipe
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base coat:apply the base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases over a cured backing layer
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base coat:apply the base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases over a cured backing layer
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Cure each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Top coat:seal the coating with a top. Cure in a UV lamp for 2-3 minutes, in an LED lamp – from 60 seconds. Allow the coating to cool completely
To level the architecture with the top, we recommend using medium-thick and thick consistency tops
! PRO tip: cover light and bright gel polishes with a top with UV filters to preserve shade intensity, and dark and red colors with a top without UV filters to prevent shade distortion
! Strict adherence to the gel polish application technique is the key to long-lasting manicure wear without chips, cracks, or lifting.