Cart is empty
Gel polish #121 – dark green
High-quality medium-consistency gel polish has a dense, rich pigment. It provides neat, even coverage of the nail plate in one or two layers, does not run into the sinuses, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV / LED lamps.
Advantages of ADORE professional:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail as desired. If using a remover, remove its residue with a damp wipe
1 Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air-dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND with a semi-dry brush over the entire nail, leaving 1 mm from the cuticle and lateral ridges. Allow it to air-dry for 15 seconds
4. Base coat:apply an even layer of base coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with a base, we recommend using only low-acid bases on a layer of cured underbase
1 Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air-dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND with a semi-dry brush over the entire nail, leaving 1 mm from the cuticle and lateral ridges. Allow it to air-dry for 15 seconds
4. Base coat:apply an even layer of base coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with a base, we recommend using only low-acid bases on a layer of cured underbase
5. Color:apply GEL POLISH in 1-2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Top coat:seal the coating with a top. Cure in a UV lamp for 2-3 minutes, in an LED lamp – from 60 seconds. Allow the coating to cool completely
To level the architecture with a top, we recommend using tops of medium-thick and thick consistency
! PRO tip: cover light and bright gel polishes with a top with UV filters to preserve color intensity, and dark and red colors – with a top without UV filters to prevent color distortion
! Strict adherence to the gel polish application technique is the key to long-lasting manicure wear without chips, cracks, or peeling.