Cart is empty
Gel polish №113 – light blue
High-quality gel polish of medium density has a dense, rich pigment. It provides neat, even coverage of the nail plate in one or two coats, does not bleed into the sinuses, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV / LED lamps.
Advantages of ADORE professional gel polish:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, give the free edge of the nail the desired shape. If you use a remover, remove its residue with a wet wipe
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base coat:apply the base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with a base, we recommend using only low-acid bases on a layer of dried underlayer
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, allow it to air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base coat:apply the base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with a base, we recommend using only low-acid bases on a layer of dried underlayer
5. Color:apply GEL POLISH in 1-2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Finish coat:seal the coating with a top. Cure in a UV lamp for 2-3 minutes, in an LED lamp – from 60 seconds. Allow the coating to cool completely
To level the architecture with a top, we recommend using top coats of medium-thick and thick consistency
! PRO tip: cover light and bright gel polishes with a UV-filter top to preserve shade intensity, and dark and red colors with a top without UV filters to prevent shade distortion
! Strict adherence to the gel polish application technology is the key to long-lasting manicure wear without chips, cracks, or peeling.