You Are Cute. Juicy Gel #6, 15 ml, gel for nail extension

Juicy Gel – a polymer light-curing material which, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• It has shock absorption and does not crack upon impact.
• It has a medium consistency.
• It has medium pigmentation, covering the free edge.
• Suitable for the "no-filing extension" technique.
• Suitable for extension on top forms.
• Does not cause burning in the lamp.
• Becomes thicker in cold and thinner in warmth.
• Thixotropic – becomes thinner when the brush is moved during application.
• It can be additionally heated to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it may flex slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlay.
• Wavelength for polymerization: 365-405 nm.
• UV/LED lamp power: 36-48 W.
• Allowable coating thickness: 0,5 mm at the tip / 1 mm at the apex.
• Full polymerization: 120 seconds.

Application method: 
REINFORCEMENT

1. Removal.
2. Do not file the nail shape, or leave 2 mm of length to be removed after leveling.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after handling them.
6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base coat has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. The base should be applied in an even layer. Paint all nail sidewalls and cure in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base, as it helps chemically bond with subsequent layers (gel, color, base). Removing the sticky layer weakens chemical adhesion and risks lifting.
10. Level. If leveling with gel, leave a 0,5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This prevents material lifting. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the tackiness and apply gel polish. 
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.
     

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and create a round shape.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after handling them.
6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer.
8. It is best to apply the Rubber Base underlay with a flat gel brush. The base should be applied in an even layer. Paint all nail sidewalls and cure in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base, as it helps chemically bond with subsequent layers (gel, color, base). Removing the sticky layer weakens chemical adhesion and risks lifting.
10. Place a form for extending the free edge of the nail.
11. Apply clear gel to shape the artificial nail. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe off tackiness and excess dust.
14. Go over the filed areas once more with Rubber Base. Cure for 30 seconds.
15. Level with gel, place in the lamp, and clamp at the 10–15th second. If the gel has strong tackiness or contains glitter, clamp at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off tackiness and excess dust.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.
     

Ingredients: Acrylates Copolymer, Hema, Silica Dimethyl Silylate, Dimethicone, Ethyl Trimethylbenzoyl Phenylphosphinate May Contain: CI 77891, CI 18965, CI 15510, CI 73360, CI 73385, CI 74160, CI 74260, CI 77266

TPO FREE