You Are Cute. Builder Gel #32, 15 ml, gel for extension with glitter particles

Builder Gel is a polymer light-curing material that, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• It has shock absorption, does not crack upon impact.
• It has a medium consistency.
• It has medium pigmentation, covers the free edge.
• Suitable for the "no-filing extension" technique.
• Suitable for extensions on "upper forms".
• Does not cause a burning sensation in the lamp.
• Becomes thicker in the cold and thinner in the warmth.
• Thixotropic — becomes thinner if the brush is moved during work.
• It can be additionally warmed up to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it may slightly flex, but this does not affect wear.
• Does not shrink and holds the arch well.
• Does require a Rubber Base underlay.
• Polymerization wavelength 365-405 nm.
• UV/LED lamp power 36-48W.
• Allowable coating thickness 0.5 mm at the tip / 1 mm at the apex.
• Full polymerization 120 seconds.

Application method: 

STRENGTHENING

1. Removal.
2. We do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. With a 220 grit nail file, we file the nail on top without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. We perform a manicure.
5. If working with removers, after handling them we wash hands with soap.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orangewood stick, wrap a wipe around it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional; however, if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Draw out all nail sidewalls and cure in lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with gel, leave a gap of 0.5–1 mm from the cuticle. Cure in lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, there will be no lifting of material. If the material is hard and the nail very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.

CLASSIC EXTENSIONS

1. Removal
2. Shorten the nail length to 1 mm and create a round shape.
3. With a 220 grit nail file, we file the nail on top without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. We perform a manicure.
5. If working with removers, after handling them we wash hands with soap.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orangewood stick, wrap a wipe around it, and wipe everything in the cuticle area and sidewalls.
7. We use primer.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Draw out all nail sidewalls and cure in lamp for 60 seconds.
9. Wipe off the tacky layer.
10. We place a form for extending the free edge of the nail.
11. Apply clear gel to create the artificial nail shape. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe off the tacky layer and excess dust.
14. Go over once more with Rubber Base on the areas where the file was used. Cure for 30 seconds.
15. Level with gel, place in the lamp, and pinch at the 10–15th second. If the gel has a strong tackiness or contains glitter, pinch at the 20th second.
16. Finish curing in lamp for 120 seconds.
17. Wipe off the tacky layer before applying gel polish.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.

(Product photos on the website may differ from the actual product)

TPO FREE