You Are Cute. Bottle Gel #23, 15 ml, liquid gel with white flowers

LIQUID GEL BOTTEL GEL — innovative material for strengthening, leveling and extension of nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, it is necessary to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally warmed to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit nail file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, after using them, wash hands with soap.
6. Degrease the nail with Nail Prep. Make two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Primer is used optionally, but if the base for the underlay has sufficient acidity, then it is not needed.
8. Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Draw through all nail sidewalls and cure in a lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. Level. If leveling with gel, make an indent from the cuticle of 0.5–1 mm. Cure in a lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the inhibition layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine