Nail sliders SOVADECOR, 171
Description
Thanks to dual-layer UV printing with a white underbase, SOVADECOR sliders have an exceptionally clear and bright image.
Sliders are made of a thin polymer film, which allows them to easily separate from the underbase after soaking and conform to the shape of the nail.
SOVADECOR sliders are very easy to use, so even technicians with little experience can create stunning designs without difficulty.
Step-by-step instructions:
1. Prepare the nails for the slider design: do a manicure and apply builder gel/gel polish. If nails are soft — strengthen them.
2. Apply the background color.
3. On the cured color layers, apply a top coat for better adhesion of the slider to the nail. Cure the top coat in a UV lamp for 1 min, or in an LED lamp for 30 sec.
4. Choose the slider, trim it, and prepare it according to the nail size.
5. Place the slider paper side down on a cotton pad soaked in warm water (! 40-50 °C), wait about 15-30 sec, and transfer the image by sliding the slider onto the nail towards the cuticle base.
6. Smooth out the film, pushing out any remaining water and air with a soft tissue. Let it air-dry or cure in the lamp. File the tips well and wipe with a lint-free wipe moistened with a tack-free cleanser to remove dust.
7. Apply 1-2 layers of top coat, curing each layer in the lamp (pay special attention to the tips; they need to be well sealed).