You Are Cute. Bottle Gel #15, 15 ml, liquid gel

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace the base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the edge of the nail, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extending.
• Has good cushioning.
• When strengthening with this gel, it is necessary to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel more liquid.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape or leave 2 mm length, which we will remove after leveling.
3. With a 220 grit nail file, we file without strong pressure on the nail from above, lifting the scales of the nail plate, or we use a 100 grit buffer.
4. We do a manicure.
5. If we work with removers, we wash our hands with soap after using them.
6. Dehydrate the nail with Nail Prep. We do two passes. For this, we use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and lateral folds.
7. Primer is used optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. We go over all lateral folds of the nail and cure in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that thickness is formed at the nail edge to support the free edge.
12. If the nail was thin, it may curl, so we must file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the stickiness and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine