You Are Cute. Bottle Gel #19, 15 ml, liquid gel

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. This gel can completely replace base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization in 120 seconds.
• Suitable only for strengthening and extending nails.
• Good shock absorption.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlay.
• Can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm length, which we will remove after leveling.
3. Use a 220 grit file to file without strong pressure on top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base for underlay has sufficient acidity, it is not needed.
8. Apply the Rubber Base underlay best with a flat gel brush. Movements should be pressing-in. Paint all nail sinuses and cure in lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with gel, make a 0.5–1 mm indentation from the cuticle. Cure in lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will prevent material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material at the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. Do not wipe after curing, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine