You Are Cute. Builder Gel #30, 15 ml, gel for extension with glitter particles

Builder Gel – a polymeric light-curing material which, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

Features:

• Acid-free.
• Has cushioning, does not crack upon impact.
• Medium consistency.
• Medium pigmentation, covers the free edge.
• Suitable for "no-filing extension" technique.
• Suitable for extension on "upper forms".
• Does not cause burning in the lamp.
• Becomes thicker in the cold, and thinner in warmth.
• Thixotropic — becomes thinner if you move the brush during application.
• Can be additionally warmed up to make the gel thinner.
• Hard at 1 mm thickness. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlay.
• Wavelength for polymerization 365-405 nm.
• UV/LED lamp power 36-48W.
• Allowable coating thickness 0.5 mm at the tip / 1 mm at the apex.
• Full polymerization 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm length, which will be removed after leveling.
3. With a 220 grit file, lightly file the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer if desired, but if the base for the underlay has sufficient acidity, it is not needed.
8. The underlay with Rubber Base is best applied with a flat gel brush. Movements should be rubbing. Paint all sidewalls of the nail and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Leveling. If leveling with gel, make a 0.5–1 mm indent from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that the edge of the nail has a thickness that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the tacky layer and coat with gel polish.
14. Apply top coat. Cure 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and make a round shape.
3. With a 220 grit file, lightly file the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer
8. The underlay with Rubber Base is best applied with a flat gel brush. Movements should be rubbing. Paint all sidewalls of the nail and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Place an extension form for the free edge of the nail.
11. Apply clear gel to form the artificial nail. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe off the tacky layer and excess dust.
14. Go over with Rubber Base on the areas where the file was used. Cure for 30 seconds.
15. Level with gel, place in the lamp and pinch at 10–15 seconds. If the gel has strong tack or contains glitter, pinch at 20 seconds.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the tacky layer before coating with gel polish.
18. Apply top coat. Cure 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

(Product photos on the website may differ from the actual product)

TPO FREE