You Are Cute. Bottle Gel #18, 15 ml, liquid gel

BOTTEL GEL LIQUID GEL is an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace a base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• During strengthening with this gel, it is necessary to file the natural nail.
• Requires a Rubber Base undercoat.
• It can be additionally warmed up to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit nail file, lightly file the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform the manicure.
5. If working with removers, wash hands with soap afterwards.
6. Dehydrate the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base for the undercoat has sufficient acidity, it is not needed.
8. Apply the Rubber Base undercoat best with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. Level. When leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is needed to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the underside. This will prevent material lifting. If the material is hard and the nail is very soft, the nail will start separating from the hard material from the free edge.
13. After filing, wipe off the inhibition layer and apply gel polish.
14. Apply top. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may fade.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine