HEYLOVE. Tint base, COYOTE, 15 ml, tint base
Thanks to the dense pigmentation and elasticity, the tinted base COYOTE creates a perfectly even coating after the first layer application.
Shade: brown
Collection: ARIZONA
Consistency: medium
Hardness/elasticity: elastic
Acidity: neutral, pH=6.7
Odor: neutral
Pigmentation: dense, covers the free edge
How to use:
-
Thoroughly degrease the nail plate with phBond dehydrator.
- Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely.
-
Apply a layer of clear Rubber base as a base coat and cure for 30 seconds.
-
Apply one or two layers of Tint base. Cure time in UV/LED lamp 60 seconds.
-
Apply a finish coating (top) as the last layer.
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000
Warning! To avoid unwanted polymerization of the material during work, testing or content shooting, the open bottle or brush should be kept as far away from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp turned away from the technician. If the switched-on lamp is facing the technician, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. It does not depend on the formula or ingredients. It depends on density (viscosity).
It's just a law of physics, nothing else.
For example, in water bubbles last a very short time and come out on their own.
If we take thicker liquids (honey, thick builder gel, etc.) - in these products bubbles readily settle in and don't leave them as quickly as water.
Same with the base. If you work carelessly with the brush, abruptly dipping it into the bottle, it involuntarily acts as a blender, mixing the material with air, forming bubbles. This is especially true for materials in bottles with a brush.
Therefore, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We deliberately chose a medium consistency because it has advantages:
- the material does not run or flood anywhere;
- contours are crisp without extra effort;
- the master calmly lays out the architecture and has time to check it by the shine;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
Our production has equipment that prevents the formation of bubbles in the material at all stages – from mixing the pigment to filling into bottles.
We also warn our partners that we are against a store consultant opening a bottle for a client and showing the material. Because a consultant who is not a master does not understand that you can create bubbles with the brush, without even realizing it.
Not to mention that the bottle necks look unsightly when they are soiled with material to the very top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the law of physics, in a warm environment molecules move faster, and this accelerates the process.
The air will rise to the surface, it is lighter than liquid.
- Ukraine
- Opaque
- Нюдовые/бежевые/коричневые