HEYLOVE. Frame builder Gel with Pump, MOCHA, 30 ml. Universal gel for extension with pump

Updated and improved formula of FRAME GEL – a modeling gel of medium creamy consistency, presented in 13 new shades.

Mocha — a coffee-beige shade with a cool undertone.

The material is easy to distribute, self-levels, and helps to form a smooth, even surface with minimal filing. Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and provides comfort for the master.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of peeling near the cuticle;
• In a layer of 1 mm thick, hard with cushioning - holds shape, resistant to chips;
• Has passed CPNP notification;
• Without HEMA, without TPO.

Video: https://www.instagram.com/reel/DZZy1VhI5p1/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==

Characteristics:

• Heating during polymerization is moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction in the "sidewall" technique;
• Extension without filing;

1. Prepare the nail plate mechanically (nail file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing movements and even out the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place into an upper form or onto a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if needed
9. Finish the manicure by applying top coat, cure for 1–2 minutes

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [*/•): CI 77499, CI 77891, CI 774910

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp facing away from the master. If you keep the lamp on with the light facing the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!