HEYLOVE. Frame builder Gel with Pump, CREAM TAN, 30 ml. Universal builder gel with pump

Updated and improved formula FRAME GEL – a modeling gel of medium creamy consistency, presented in 13 new shades.

Cream Tan — classic nude gel shade.

The material spreads easily, self-levels and helps form a smooth, even surface with minimal filing. Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort during the master's work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• In a thin layer elastic - reduces the risk of detachment near the cuticle;
• In a 1 mm thick layer hard with some cushioning - holds shape, resistant to chips;
• Certified CPNP
• HEMA-free, TPO-free.

Video: https://www.instagram.com/reel/DZZy1VhI5p1/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== 

Characteristics:

• Heating during polymerization moderate, not above 37°C;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in LED 48W lamp;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the 'border' technique;
• No-filing extensions;

1. Prepare the nail plate mechanically (nail file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place in an upper form or on a lower form (depending on technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if needed
9. Finish the manicure by applying top, cure for 1–2 minutes

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [*/•): CI 77499, CI 77891, CI 77491

Attention! To avoid unwanted polymerization of the material during work, testing or content shooting, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp pointed away from the master. If you keep the lamp on with the light facing the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Note: all documents are in the attached files!