HEYLOVE. Frame builder Gel, CLEAR, 30 ml. Universal builder gel, clear

Updated and improved formula FRAME GEL – a modeling gel of medium creamy consistency, presented in 13 new shades.

Clear — transparent gel.

The material is easy to spread, self-levels, and helps to form a smooth, even surface with minimal filing. Thanks to the balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and provides comfort in the master's work.

Please note! The difference between the two palettes lies in the application technique. Since FRAME GEL is used for strengthening/coating and extension, the color saturation effect will vary.

1. On nail tips with stickers – strengthening effect.

2. On impressions of upper forms – extension effect.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer – reduces the risk of lifting near the cuticle;
• Hard but with cushioning in a 1 mm layer – holds its shape, resistant to chipping;
• CPNP notified;
• HEMA-free, TPO-free.

Video: https://www.instagram.com/reel/DZZy1VhI5p1/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== 

Characteristics:

• Moderate heating during polymerization, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the "sidewall" technique;
• Filing-free extension;

1. Prepare the nail plate mechanically (nail file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary
9. Finish the manicure by applying top coat, cure for 1–2 minutes

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [*/•): CI 77499, CI 77891, CI 77491

Caution: For professional use only. Keep out of reach of children. Avoid contact with skin surrounding the and eyes. irritation occurs, discontinue use. May cause an allergic reaction. Use in a well-ventilated area. Read and follow instructions. Keep away from direct sunlight.

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, enough for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the UV lamp away from the master. If the lamp is turned on with the light directed towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!