ADORE. One Drop Gel, 30 g, #01, Pink kiss. Builder gel, cool soft pink

Nail extension gel in a jar with a vacuum pump one Drop Gel No. 01 - cool soft pink

one Drop Gel is a medium-density camouflage gel for extension, strengthening, and correction of nail architecture for medium and above-medium length nails.

Used for:
- extensions on top and bottom forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Benefits of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before first use, remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish shade appears on the surface of the nail plate.
3. Bonding: when using adhesive base PRO BASE-BOND, skip this step.
4. Base layer: apply an even priming layer of base coat PRO BASE-BOND, thoroughly covering the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire nail plate, leaving 1mm from the cuticle. On the uncured gel, apply a second leveling layer, taking into account the basic principles of modeling with hard materials. Cure in a UV lamp for 2-4 min, in an LED lamp - 90 sec.
Remove the residual stickiness with PREP&FINISH and a lint-free wipe. Using a 150/180 grit file, perform step-by-step shaping.

PRO tips:
- to facilitate material application, you can use top forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare/install forms one by one on each finger. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, then model the nail architecture with gel. To create an arch, you can squeeze the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp until the gel is fully polymerized: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual stickiness with PREP&FINISH and a lint-free wipe. Using a 150/180 file, perform step-by-step shaping.

PRO tip: apply gel leaving a minimum of 1mm from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g