ADORE. One Drop Gel, 30 g, #04, Muted rose. Builder gel, light nude

Builder gel in a jar with a vacuum pump one Drop Gel №04 - light nude

one Drop Gel - medium-density camouflage builder gel for nail extension, strengthening, and correction of medium and medium-long nail architecture.

Used for:
- extension on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before using, you must remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the necessary shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding: when using PRO BASE-BOND adhesive base, skip this step
4. Base layer: apply an even priming layer of PRO BASE-BOND base coating, carefully sealing the side walls and free edge. Polymerize the base coating in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate with a 1mm indentation from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the residual stickiness using PREP&FINISH and a lint-free wipe. Use a 150/180 grit nail file to perform a step-by-step shape filing.

PRO tips:
- to facilitate material application, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare/install forms on each finger one by one. Place a thin overlay of the desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, you can press the gel at 7-12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp until the gel is fully polymerized, for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual stickiness using PREP&FINISH and a lint-free wipe. Use a 150/180 grit file to perform a step-by-step shape filing.

PRO tip: apply gel with an indentation from the cuticle of min 1mm to avoid material lifting in this area

Brand: ADORE 
Volume: 30 g