ADORE. One Drop Gel, 30 g, #02, Ballerina pink. Builder gel, light pink

Builder gel in a jar with a vacuum pump One Drop Gel #02 - light pink

One Drop Gel is a medium-density camouflage builder gel for nail extensions, strengthening, and correction of the nail architecture for medium to above-medium length nails.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of One Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, a natural shade that camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before first use, remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: if using the adhesive base PRO BASE-BOND, skip this step.
4. Base layer: apply a thin, even layer of base coat PRO BASE-BOND, thoroughly brushing the side walls and free edge. Cure the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate, leaving a 1 mm gap from the cuticle. Without curing, apply a second leveling layer, considering the basic principles of modeling with hard materials. Cure in a UV lamp for 2-4 minutes, in an LED lamp for 90 seconds.
Remove the sticky residue using PREP&FINISH and a lint-free wipe. Use a 150/180 grit file to shape the nail.

PRO tips:
- to make material application easier, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.

Extensions: prepare/place forms on each finger one by one. Apply a thin underlay of the desired length and shape directly onto the lower or upper form, then model the nail architecture with the gel. To create an arch, you can press the gel at 7-12 seconds, depending on the lamp type and power. Then cure the nail until the gel is fully polymerized: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the sticky residue using PREP&FINISH and a lint-free wipe. Use a 150/180 grit file to shape the nail.

PRO tip: apply the gel with a gap of at least 1 mm from the cuticle to avoid material lifting in this area.

Brand: ADORE
Volume: 30 g