ADORE. One Drop Gel, 30 g, #10, Brown sugar. Builder gel, coffee

Builder gel for nail extensions in a jar with a vacuum pump one Drop Gel №10 - coffee

one Drop Gel - medium-thick camouflage builder gel for extensions, strengthening, and correction of nail architecture for medium and above medium length.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before starting use, you need to remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, shape the free edge of the nail as desired.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the nail plate surface
3. Bonding: when using adhesive base PRO BASE-BOND skip this step
4. Base layer: apply a priming even layer of base coat PRO BASE-BOND, carefully treating the side walls and free edge. Cure the base coat in UV lamp for 2-3 min, in LED lamp 60 sec.
5. Strengthening: with a gel brush, apply a rubbing layer of builder gel over the entire nail plate surface, staying 1mm away from the cuticle. On the uncured gel, apply a second leveling layer, taking into account the basic principles of modeling with hard materials. Cure in UV lamp for 2-4 min, in LED lamp - 90 sec.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 grit file, perform step-by-step filing of the shape.

PRO tips:
- to facilitate material application, you can use upper forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare / set the forms one by one on each finger. Lay out a thin substrate of the desired length and shape directly on the lower or upper form, then model the nail architecture with builder gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp for full polymerization of the gel for 60 seconds in LED lamp, 3-4 minutes in UV lamp.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 file, perform step-by-step filing of the shape.

PRO tip: apply builder gel with a minimum 1mm distance from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g