Cart is empty
Gel polish №492 – terracotta
High-quality gel polish of medium density has a dense, rich pigment. It provides neat, even coverage of the nail plate in one or two layers, does not run into the side grooves, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV / LED lamps.
Advantages of ADORE professional:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: do a manicure, give the free edge of the nail the desired shape. If using a remover, remove its residue with a damp wipe
1 Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Let it air-dry for 15 seconds
4. Base coat:apply the base coating in a medium layer. Cure the base coating in a UV lamp for 2–3 minutes, in an LED lamp for 60 seconds. To level the nail plate with the base, we recommend using only bases with a low acid level
1 Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Let it air-dry for 15 seconds
4. Base coat:apply the base coating in a medium layer. Cure the base coating in a UV lamp for 2–3 minutes, in an LED lamp for 60 seconds. To level the nail plate with the base, we recommend using only bases with a low acid level
5. Color:apply gel polish in 1–2 thin layers. Cure each layer in a UV lamp for at least 2 minutes, in an LED lamp for at least 30 seconds
6. Finish:seal the coating with a top coat. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 1 minute. Let the coating cool completely
To level the nail plate with a top coat, we recommend using top coats of medium-thick and thick consistency. When using a top coat with a sticky layer RUBBER TOP, allow the coating to cool, then remove the stickiness with PREP&FINISH and a lint-free wipe.
! PRO tip: cover light and bright gel polishes with a top coat with UV filters to preserve color intensity, and dark and red shades with a top coat without UV filters to prevent shade distortion
! Strict adherence to the gel polish application technology is the key to long-lasting manicure wear without chips, cracks, or peeling.